User Manual

    DKS800 Series Electric Control Antitheft Lock is new mechanotronical lock specifically designed for security door. 
    The main part of this lock is composed of core-inserted mechanical body combining with electronic controlling circuit and the electronic key with single electrode. The electric code adopts two-way random hopping identification technique. It has both the simplicity and stability of mechanical lock and high security of electronic lock. Its installation is basically the same as that of the mechanical core-inserted lock.
    To choose Guarddaily’s Electric Control Antitheft Lock is your valuable choice!

    Main features:
    1. User copy keys by themselves 
    2. Indicate user if forgetting to take the key out,
    3. Counter lock outdoor,
    4. Use key to unlock the door 

    Condition and Installation:
    1. Condition:
    Circumstance temperature: –10~+40℃ 
    Relative humidity: 10%~95%
    Atmospheric pressure: 86~106KPa
    2.Power: DC 7.5V(No. 5 battery AAA 5pcs). Open the inner gusset plate,put the 5 batteries inside and it’ll work.
    3.Installation method:
    (1) Refer to diagram of the size of lock body (a) (b) in diagram 1;
Refer to diagram (c ) (d) the distance of the installation hole.

    (2) As figure2shows, insert the lock body (8) into the door, fasten it with 4 bolts(12), then push the tip (5) into the body from the inner edge and fasten it with abolt (9).

    (3) The front-panel assembly: Screw the two connecting pipes (10), aiming straight at the door hole in the outer door sheet from the side of outer door sheet against the level of the outer door sheet (Note: first pull the wire connecting with front-panel through the hole of door sheet out of the inner side of the door sheet).Screw the two bolts(6) to the front-panel(11) through  the two holes of the tapered end.
    (4)To install lining board inside the electric circuit: pull the wire connecting with the tapered end out through the hatch of lining board inside the electric circuit, aiming at the hole of the door from the inner side of the door sheet (7) against the lining board. Screw the two bolt poles(4) to the connecting pipe(10) through the hole of interlining board and then fix lining board inside the electric circuit.
    (5) The circuit connection: plug the wire connecting with the front-panel and the wire connecting with the tapered end to two pins and four pins separately, and then put the 5pcs of AAA battery into the battery box according to the right pole indication correctly.
    (6). How to install the inner handle panel: Plug the inner squire bar (3) into the squire hole of inner handle, aiming at the lock hole (2) against the level of lining board, and then fasten it with the two bolts (1).Then comes the end of installation.

    HOW TO USE 
    1.Duplicate Key
    There are two ways to enter into duplicating key mode.
    (1). Insert management key into the lock hole, after hearing the indicator tone, press the RED button on the pad of lock, there comes the indicator tone Toot…Toot…last 60s, there is a long indicator tone, now it’s ready for confecting key.
    (2). If the management key lost, take the battery out and after 5 minutes put the battery in again. Within 2 minutes after powered again, press the RED button on the pad of lock, there comes the indicator tone Toot…Toot…Then over 60s, there is a long indicator tone. Now it’s ready for confecting key.
    After entering into the duplicating mode, insert the all keys which need duplicating, including the legal keys. After insetting the key, there is a short indicator tone, this means it is okay, if there are two short indicator tones, this means it fails. After all keys are duplicated, press the button again and you’ll hear a long indicator tone, that means the duplicating work finished and exit the confecting mode.

    2.Warning for forgetting to draw the key 
    If you forget to draw out the key after unlock, the buzzer will warn after 30s, if still not draw out, it’ll warn 15s for every 60s.

    3.Counter Locked Outdoor
    After closing the door, insert the key and then there is an indicating tone, rotate two circles into lock outside the door mode. (Double-Fast lock makes two and a half circles). You can’t unlock the door inside your room..

    4.Unlock By Key
    Insert valid key then you’ll hear an indicating tone, rotate to unlock the lock, no need to memorize the pass words of the key.